Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring a Parameter Definition to Adjust Cell Shaping Rates for ADSL Traffic

    You can adjust shaping rates to account for different layer 2 encapsulations as well as the ATM cell pad, header, and trailer on interfaces with cell shaping mode using the qos-byte-adjustment application.

    Note: When you apply a parameter with the qos-byte-adjustment application to an interface with frame shaping mode, you adjust shaping rates to account for different layer 2 encapsulations only.

    To associate a parameter instance with the byte adjustment application:

    1. Configure the traffic classes.
      host1(config)#traffic-class voice host1(config-traffic-class)#exit host1(config)#traffic-class best-effort host1(config-traffic-class)#exit
    2. Create a parameter definition.
      1. Configure the QoS parameter name and the application.
        host1(config)#qos-parameter-define byteadjust1 application qos-byte-adjustment
      2. Configure a controlled-interface type.
        host1(config-qos-parameter-define)#controlled-interface-type vlan host1(config-qos-parameter-define)#controlled-interface-type ip
      3. Configure an instance-interface type.
        host1(config-qos-parameter-define)#instance-interface-type vlan
    3. Do one of the following:
      • Configure the shaping mode by issuing the qos-shaping-mode command.

        Frame shaping mode is the default for Ethernet interfaces on all E Series routers. You can only set the cell shaping mode for Gigabit Ethernet and 10-Gigabit Ethernet interfaces configured on the GE-2 line module, the GE-HDE line module, and the ES2 4G LM.

      • Configure the shaping mode by specifying the QoS cell mode application with a parameter definition.
        host1(config)#qos-parameter-define cell-mode application qos-cell-mode
    4. Attach the parameter definition to a logical Ethernet interface.

      In this example, parameter instances are created for both the byte adjustment and QoS cell mode applications.

      host1(config)#interface gigabitEthernet 7/0 host1(config-if)#encapsulation vlan host1(config-if)#exit host1(config)#interface gigabitEthernet 7/0.1 host1(config-if)#vlan id 1 host1(config-if)#qos-parameter byteadjustment -16 host1(config-if)#qos-parameter cell-mode 1 host1(config-if)#ip address 1.1.1.1 255.255.255.0

    Published: 2014-08-11