Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Interface Sets for QoS

    Interface sets are members of interface supersets. An interface set joins a superset when it is defined with the superset as a parent.

    Tasks to configure an interface set for QoS include:

    Configuring an Interface Set

    To configure an interface set:

    1. Configure the interface set.
      host1(config)#qos-interface-set vlan-business
    2. Specify the parent interface.
      host1(config-interface-set)#qos-interface-parent vlan-superset

      The parent must be an interface superset.

    3. Set the member-interface type.
      host1(config)#member-interface-type vlanhost1(config)#member-interface-type ip

      You can specify vlan, atm-vc, or ip for the member-interface type.

      If the parent interface superset is attached to an Ethernet major interface, the valid interface types are vlan and ip.

      If the parent interface superset is attached to an ATM major interface, the valid interface types are atm-vc or ip.

    Deleting an Interface Set from an Interface Superset

    To delete an interface set from an interface superset:

    1. Specify the interface superset.
      host1(config)#qos-interface-superset business-data
    2. Delete the interface set from the interface superset.
      host1(config-qos-interface-superset)#no qos-interface-set atm-vc-data

    Published: 2014-08-11