Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
Disabling Per-Port Queuing on ATM Interfaces
You can remove per-port queuing on ATM interfaces and restore the default integrated mode setting.
When per-port queuing is disabled, both the VC and port backpressure are enabled. The SAR scheduler performs significant buffering, and the HRR scheduler does minimal scheduling. The atm-vc node command must appear in the QoS profile attached to the ATM port.
To disable per-port queuing:
- Specify the ATM interface for which you want to disable
per-port queuing.host1(config)#interface atm 2/0
- Disable per-port queuing on that interface. host1(config-if)#no qos-mode-port
