Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Enabling Usage of PPPoE Service Name Tables with Dynamic Interfaces

    To enable a PPPoE service name table for use with a dynamic interface, add the service name table to a profile that is dynamically assigned to the interface.

    For complete details, see Dynamic Interface Configuration Using a Profile.

    To enable a PPPoE service name table for use with a dynamic interface:

    1. Create a profile by assigning it a name.
      host1(config)#profile baseProfile
    2. Assign the PPPoE service name table to the profile as a PPPoE characteristic.
      host1(config-profile)#pppoe service-name-table myServiceTable1
    3. Exit Profile Configuration mode.
    4. Configure a physical interface.

      On ERX7xx models, ERX14xx models, and the ERX310 router:

      host1(config-if)#interface atm 3/0.1
    5. Configure an ATM PVC by specifying the VCD, the VPI, the VCI, and the encapsulation type.
      host1(config-subif)#atm pvc 10 100 22 aal5snap
    6. Apply the profile to the interface.
      host1(config-subif)#profile pppoe baseProfile
    7. Enable the PPPoE dynamic encapsulation type.
      host1(config-subif)#auto-configure pppoe

    Published: 2014-08-14