Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring PADN Messages

    You can configure the PPPoE application to receive a specific PADN message from the server. When a client connects to a PPPoE server, the client receives configuration information from the server in the PADN message.

    To configure the PPPoE application to receive a PADN message:

    • From the Global Configuration mode, specify the domain name that maps to the virtual router and the client’s domain name:
      host1#aaa domain-map xyz.com

      Use the no version to delete the map entry.

    • From the Domain Map Configuration mode, specify the PADN parameters for the domain name.
      host1(config-domain-map)#padn 10.2.25.6 255.255.255.0 10 host1(config-domain-map)#padn 20.2.0.0 255.255.0.0 11

      Use the no version to delete PADN parameters for the domain map.

    Published: 2014-08-14