Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring MOTM Messages from Interface Configuration Mode

    You can configure the PPPoE application to send a specific PADM message to the client as it is configured (if connected). The message is also sent whenever the subinterface transitions from down to up. The MOTM string is passed with no changes. The message string is saved in NVS.

    To configure the PPPoE application to send a MOTM message in a PADM packet:

    • From the Interface Configuration mode, specify the message:
      host1(config-if)#interface fastEthernet 1/0.1.1 host1(config-if)#pppoe motm Router going down at 10:00 p.m.

      Use the no version to disable the message.

    Published: 2014-08-14