Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Creating Policy Lists for L2TP

    The following example creates an L2TP policy list.

    1. Create the policy list routeForl2tp.
      host1(config)#l2tp policy-list routeForl2tphost1(config-policy-list)#
    2. Create the classification group to match all packets.
      host1(config-policy-list)#classifier-group *host1(config-policy-list-classifier-group)#
    3. Add a rule to color packets as red, and a second rule that uses the rate-limit profile l2tpRLP10.
      host1(config-policy-list-classifier-group)#color redhost1(config-policy-list-classifier-group)#rate-limit-profile l2tpRLP10
    4. Exit Policy List Configuration mode to save the configuration.
      host1(config-policy-list-classifier-group)#exit host1(config-policy-list)#exit host1(config)#
    5. Display the policy list.
      host1#show policy-list routeForl2tp
      
                                        Policy Table
                                        ------ -----
      L2TP Policy routeForl2tp
         Administrative state: enable
         Reference count:      0
         Classifier control list: *, precedence 100
            color red
            rate-limit-profile l2tpRLP20

    Published: 2014-08-14