Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Router to Start Mirroring When User Logs On

    To configure the router to support user-initiated mirroring, which starts when the user logs in:

    1. Configure RADIUS server authentication information in the router. See JunosE Broadband Access Configuration Guide for information.
    2. Configure the analyzer interface to send the mirrored traffic to the analyzer device.
      host1(config)#interface fastEthernet 4/0 host1(config-if)#ip analyzer

      Alternatively, for increased security, create the analyzer interface at one end of an IPSec tunnel to the analyzer device.

      host1(config)# interface tunnel ipsec:mirror3 transport-virtual-router default host1(config-if)#ip analyzer host1(config-if)#exit host1(config)#ip route tunnel ipsec:mirror3

    Published: 2014-08-14