Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Specifying Unicast Routes for RPF in IPv6

    You can use the ipv6 route-type command to specify that BGP or OSPF IPv6 routes should be available for RPF. Routes available for RPF appear in the multicast view of the routing table.

    To specify that BGP IPv6 routes are available for both unicast protocols and multicast protocols to perform RPF checks:

    host1(config)#router bgp host1(config-router)#ipv6 route-type both

    Published: 2014-08-20