Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Defining Static Routes for Reverse-Path Forwarding

    Use the ip rpf-route command to define reverse-path forwarding (RPF) to verify that a router receives a multicast packet on the correct incoming interface.

    host1(config)#ip rpf-route atm4/1.1 56 tag 25093

    You can use the no version to disable IP multicast routing on the VR (the default). In the disabled state, all multicast protocols are disabled, and the VR forwards no multicast packets.

    Published: 2014-08-20