Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- Deleting Multicast Forwarding Entries
- Monitoring Multicast Forwarding Entries
- Monitoring Active Multicast Routes
- Monitoring Multicast Entries in a Source or Group
- Monitoring Multicast Routes When OIF Mapping Is Configured
- Monitoring Multicast Statistics
- Monitoring Summary Information of Multicast Routes
- Monitoring the IP Multicast Status on a Virtual Router
- clear ip mroute
- ip multicast-routing permanent-mroute
Defining Permanent IP Multicast Forwarding Entries
An mroute is a multicast traffic flow (a (Source, Group) entry used for forwarding multicast traffic). By default, forwarding mroutes (with a valid RPF incoming interface) are timed out if data for them is not received for 210 seconds. However, you can specify an mroute as permanent by using the ip multicast-routing permanent-mroute command.
host1(config)#ip multicast-routing permanent-mroute
routes1
You can use the no version to prevent any new mroutes from becoming permanent. To remove existing permanent mroutes, use the clear ip mroute command.
Related Documentation
- Deleting Multicast Forwarding Entries
- Monitoring Multicast Forwarding Entries
- Monitoring Active Multicast Routes
- Monitoring Multicast Entries in a Source or Group
- Monitoring Multicast Routes When OIF Mapping Is Configured
- Monitoring Multicast Statistics
- Monitoring Summary Information of Multicast Routes
- Monitoring the IP Multicast Status on a Virtual Router
- clear ip mroute
- ip multicast-routing permanent-mroute
