Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Enabling Multiclass MLPPP

    You can enable multiclass MLPPP on an MLPPP interface and create a specified number of multilink classes on it. A maximum number of eight multilink classes are supported per MLPPP interface.

    Before you enable multiclass MLPPP:

    To enable multiclass MLPPP and create a specified number of multilink classes on a dynamic MLPPP interface:

    1. From Global Configuration mode, create an MLPPP dynamic profile by assigning it a name.
      host1(config)#profile ppp-multilink-profile
    2. Enable multiclass MLPPP and specify the number of multilink classes to create.
      host1(config-profile)#ppp multilink multiclass multilink-classes 8

    To enable multiclass MLPPP and create a specified number of multilink classes on a static MLPPP interface:

    1. From Global Configuration mode, specify the individual interface on which you want to configure multiclass MLPPP.
      host1(config)#interface gigabitEthernet 3/0/0
    2. Specify PPPoE as the encapsulation method on the interface.
      host1(config-if)#encapsulation pppoe
    3. Create a PPPoE subinterface.
      host1(config)#interface gigabitEthernet 3/0/0.10
    4. Specify MLPPP as the encapsulation method on the subinterface.
      host1(config-if)#encapsulation mlppp
    5. Enable multiclass MLPPP and specify the number of multilink classes to create.
      host1(config-if)#ppp multilink multiclass multilink-classes 8

    Published: 2014-08-14