Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Configuring Hash-Based MLPPP Link Selection
You can configure hash-based MLPPP link selection in any of the following ways:
- To configure hash-based link selection for a individual MLPPP member link, issue the ppp hash-link-selection command from Interface Configuration mode or Subinterface Configuration mode in the context of the individual link interface.
- To configure hash-based link selection for all current member links in an MLPPP bundle, issue the ppp hash-link-selection command from Interface Configuration mode in the context of the MLPPP bundle. Doing this has the same effect as issuing the ppp hash-link-selection command separately for each member link in the bundle.
- To configure hash-based link selection for all dynamic MLPPP link interfaces created by a profile, issue the ppp hash-link-selection command from Profile Configuration mode.
For a detailed description and examples of using the ppp hash-link-selection command.