Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    Configuring the IGP Outside the VRF Context

    The RIP and OSPF protocols also enable you to specify a VRF and configure the protocol without actually entering the VRF context.

    For example, for OSPF you might issue the following command and then complete OSPF configuration tasks for VRF A:

    host1(config)#router ospf 100 vrf vrfa

    For RIP, you create the RIP process, specify the address family for the VRF, and specify redistribution of BGP routes for VRF A:

    host1(config)#router rip 100 host1(config-router)#address-family ipv4 vrf vrfa host1(config-router-af)#redistribute bgp

    At this point you proceed with RIP configuration for the VRF. For information about configuring IS-IS, OSPF, or RIP as the IGP, see the cit-junose-ip-ip6-igp;. For information about configuring BGP as the IGP, see Unresolved xref.

     

    Related Documentation

     

    Published: 2014-08-18