Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Customer-Facing Interfaces in the VPWS Instance

    To configure a customer-facing interface for an VPWS instance:

    1. Access Interface Configuration mode for a layer 2 interface for the VPWS on the PE router.
      host1(config)#interface fastEthernet 4/0
    2. Configure the local and remote site IDs on the interface to specify the interface as a member of the VPWS L2VPN.
      host1(config-if)#l2vpn exampleco local-site-id 1 remote-site-id 2 host1(config-if)#exit
    3. Repeat for all customer-facing interfaces in the VPWS.
      host1(config)#interface fastEthernet 4/1 host1(config-if)#l2vpn exampleco local-site-id 1 remote-site-id 3 host1(config-if)#exit

    Published: 2014-08-18