Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring the Loopback Interface and Router ID for BGP for VPWS

    To configure the loopback interface and router ID on the PE router:

    1. Configure a loopback interface on the PE router and assign an IP address to the interface.
      host1(config)#interface loopback 0 host1(config-if)#ip address host1(config-if)#exit
    2. Assign the router ID using the IP address you configured for the loopback interface.
      host1(config)#ip router-id

    Published: 2014-08-18