Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Creating an IPsec Transport Profile

    You can use the ipsec transport profile command to create an IPsec transport profile and enter into IPsec Transport Profile Configuration mode.

    You can use the following keywords to create a new profile:

    • virtual-router—Name of the virtual router on which you want to create the profile.
    • ip address—Remote endpoint for the IPsec transport connection.

      For L2TP/IPsec connections, you can enter a fixed IP address or the wildcard address, If you use the wildcard address, the profile accepts any remote client connection, which is a typical scenario for secure remote access.

      For GRE/IPsec and DVMRP/IPsec connections, you must enter a fixed address; the wildcard address is not accepted and returns an error.

    To create an IPsec transport profile:

    • Issue the ipsec transport profile command in Global Configuration mode.
    host1(config)#ipsec transport profile secureL2tp virtual-router default ip address host1(config-ipsec-transport-profile)#

    Use the no version to delete the profile.

    Published: 2014-08-12