Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Enabling Proxy ARP

    You can enable proxy ARP on an Ethernet or bridge1483 interface using the ip proxy-arp command. Proxy ARP is enabled by default.

    Note:

    • Before you configure IP, you must create the lower-layer interfaces over which IP traffic flows.
    • All IP configurations will be removed from the interface when you issue the no ip interface command in Interface Configuration mode.

    To enable proxy ARP on an interface:

    • Issue the ip proxy-arp command in Interface Configuration mode.
      host1(config-if)#ip proxy-arp unrestricted

      Use the no version to disable proxy ARP on the interface.

    Published: 2014-08-13