Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Clearing Dynamic Entries from the ARP Cache
You can clear a particular dynamic entry from the ARP cache using the clear arp command by specifying all of the following options:
- ipAddress—IP address in four-part dotted-decimal format corresponding to the local data link address
- interfaceType—Interface type; see Interface Types and Specifiers in JunosE Command Reference Guide
- interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in JunosE Command Reference Guide
You can clear all dynamic entries from the ARP cache using the clear arp command with an asterisk (*).
To clear all dynamic entries:
- Issue the clear arp command
with an asterisk (*) in Privileged Exec
mode.host1#clear arp
