Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     
     

    Configuring IGMP Attributes

    You can configure IGMP attributes using the following tasks:

    Configuring Explicit Host Tracking

    The following example enables IGMP V3 explicit host tracking on interface 3/0.101 with the default configuration where the router continues to perform explicit host tracking for IGMP V2 groups. To override this default configuration, you must use the ip igmp explicit-tracking disable-if-igmp-v2-detected command.

    user@host#interface 3/0.101user@host#ip igmp version 3user@host#ip igmp explicit-tracking

    Disabling and Removing IGMP

    To disable and re-enable IGMP on the VR:

    • Disable IGMP on a VR.
      host1(config)#virtual-router boston host1:boston(config)#router igmp host1:boston(config-router)#igmp disable
    • Enable IGMP on a VR.
      host1(config)#virtual-router boston host1:boston(config)#router igmp

    You can remove IGMP from the VR and recreate it on the VR.

     
     

    Published: 2014-08-19