Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring a Virtual Router as an NFS Client

    To configure a virtual router as an NFS client:

    1. Access the virtual router context.
    2. Add the remote host to the host table. For more information, see Adding or Modifying an Entry in the Host Table.
      host1:boston(config)#host host50 10.2.3.4
    3. Configure the remote host as an NFS server for this virtual router. Optionally, specify a user identity and a group identity that a user must specify to connect to the remote host. The default user identity is 2001, and the default group identity is 100.
      host1:boston(config)#ip nfs host host50 user 1500 group 150
    4. Specify the E Series interface that this virtual router will use to exchange NFS communications with this server. Specify either the source-address keyword with the IP address of the interface or the source-interface keyword with the interface type and specifier. For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.
      host1:boston(config)#ip nfs source-address 10.1.1.1 host1:boston(config)#ip nfs source-interface atm 3/2.6

      Issuing this command provides connectivity between the E Series router and the remote host if the network configuration restricts communications between devices.

    Published: 2014-08-12