Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring the Static ATM AAL5 Interface to Support Autodetection of an ATM 1483 Dynamic Encapsulation Type

    You can use the auto-configure atm1483 command to configure the static ATM AAL5 interface to enable all bulk configurations and support autodetection of an ATM 1483 dynamic encapsulation type. This command enables creation of a dynamic ATM 1483 subinterface.

    To configure the static ATM AAL5 interface to enable all bulk configurations and support autodetection of an ATM 1483 dynamic encapsulation type:

    • Issue the auto-configure atm1483 command in Interface Configuration mode.
    host1(config-if)#auto-configure atm1483

    Use the no version to terminate autodetection of the ATM 1483 encapsulation type.

    Published: 2014-08-14