Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Assigning the Base Profile Configured for a Dynamic ATM 1483 Subinterface to the VC Range Configured on a Static ATM AAL5 Interface

    You can use the profile atm1483 bulk-config-name command to assign the base profile configured for a dynamic ATM 1483 subinterface to the VC range configured on a static ATM AAL5 interface.

    When assigning the base profile configured for a dynamic ATM 1483 subinterface to the VC range configured on a static ATM AAL5 interface, you must specify the following:

    • Name assigned to the VC range on an ATM AAL5 interface, as specified in the atm bulk-config command
    • Name assigned to the base profile for a dynamic ATM 1483 subinterface

    To assign the base profile configured for a dynamic ATM 1483 subinterface to the VC range configured on a static ATM AAL5 interface:

    • Issue the profile atm1483 bulk-config-name command in Interface Configuration mode.
    host1(config-if)#profile atm1483 bulk-config-name myBulkConfig atm1483BaseProfile

    Use the no version to remove the profile assignment.

    Published: 2014-08-14