Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring a Base Profile to Set Up an Advisory Receive Speed for a Dynamic ATM 1483 Subinterface

    You can use the atm atm1483 advisory-rx-speed command to set an advisory receive speed for a dynamic ATM 1483 subinterface created with a base profile. This setting has no effect on data forwarding. It indicates the speed of the client interface. When traffic is tunneled with L2TP, the advisory receive speed is sent from the LAC to the LNS. See LAC Configuration Prerequisites for additional information about the advisory receive speed. The range is 0–2147483647 kbps.

    To set an advisory receive speed for a dynamic ATM 1483 subinterface created with a base profile:

    • Issue the atm atm1483 advisory-rx-speed command in Profile Configuration mode.
    host1(config-profile)#atm atm1483 advisory-rx-speed 2000

    Use the no version to restore the default behavior—the RX speed is not sent to the LNS.

    Published: 2014-08-14