Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring a QoS Adjustment Factor Applied to the ANCP Reported Data Rate

    You can configure a QoS adjustment factor that is applied to the upstream data rate and downstream data rate reported by ANCP for a DSL type. The adjustment factor is used to generate an accurate QoS shaping rate. The factor is applied for all subscribers that use the specified DSL line type.

    To configure a QoS adjustment factor that is applied to the upstream and downstream data rates reported by ANCP for a DSL type:

    • From L2C Configuration mode, configure a QoS adjustment factor to be applied for all subscribers that use the specified DSL line type.
      host1(config-l2c)#adjustment-factor adsl1 45 host1(config-l2c)#adjustment-factor adsl2 55 host1(config-l2c)#adjustment-factor adsl2+ 67 host1(config-l2c)#adjustment-factor vdsl 91 host1(config-l2c)#adjustment-factor vdsl2 55 host1(config-l2c)#adjustment-factor sds 12

    You can use the no version to restore the default condition, wherein no adjustment factor is applied to the ANCP-reported value. This command has the same effect as applying an adjustment factor of 100 to a DSL line type.

    Published: 2014-08-12