Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Assigning a Local User Database to a Virtual Router

    Use the procedure in this section to assign a local user database to a virtual router. The virtual router uses the database for local authentication when the subscriber connects to the E Series router. Use the following commands in Global Configuration mode:

    Note: If you do not specify a local user database, the virtual router selects the default database by default. This applies to all virtual routers.

    1. Specify the virtual router name.
      host1(config)# virtual-router cleveland
    2. Specify the database to use for authentication on this virtual router.
      host1:cleveland(config)# aaa local select database westLocal40

    Published: 2014-08-20