Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    VLAN and S-VLAN Platform Considerations

    You can configure VLAN and S-VLAN subinterfaces on the following E Series Broadband Services Routers:

    • E120 router
    • E320 router
    • ERX1440 router
    • ERX1410 router
    • ERX710 router
    • ERX705 router
    • ERX310 router

    Module Requirements

    For information about the modules supported on E Series routers:

    • See the ERX Module Guide for modules supported on ERX7xx models, ERX14xx models, and the ERX310 router.
    • See the E120 and E320 Module Guide for modules supported on the E120 and E320 routers.

    Interface Specifiers

    The configuration task examples in this chapter use the format for ERX7xx models, ERX14xx models, and the ERX310 router to specify a VLAN or S-VLAN subinterface.

    For ERX7xx models, ERX14xx models, and ERX310 router, use the slot/port[.subinterface ] format. For example, the following command specifies a VLAN subinterface configured on port 0 of an I/O module in slot 4.

    host1(config)#interface fastEthernet 4/0.1

    For E120 and E320 routers, use the slot/adapter/port[.subinterface ] format, which includes an identifier for the bay in which the I/O adapter (IOA) resides. For example, the following command specifies a VLAN subinterface configured on port 0 of the IOA installed in the upper adapter bay of slot 3.

    host1(config)#interface gigabitEthernet 3/0/0.1

    For more information about interface types and specifiers on E Series models, see Interface Types and Specifiers in JunosE Command Reference Guide.

     

    Related Documentation

     

    Published: 2014-08-14