Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    CLI Commands Used to Include or Exclude Attributes in RADIUS Messages

    You can use the radius include command to enable or disable the inclusion of RADIUS attributes in Acct-on, Acct-off, Access-Request, Acct-Start, and Acct-Stop messages.

    Table 1 lists the RADIUS attributes that can be included or excluded in RADIUS messages using the radius include command and the RADIUS messages in which the attributes are supported.

    Table 1: RADIUS Attributes Included in Corresponding RADIUS Messages

    Attribute Number

    Attribute Name

    Access-Request

    Acct-on

    Acct-off

    Acct-Start

    Acct-Stop

    [5]

    NAS-Port

    [8]

    Framed-IP-Address

    [9]

    Framed-IP-Netmask

    [13]

    Framed-Compression

    [22]

    Framed-Route

    [25]

    Class

    [26-10]

    Ingress-Policy-Name

    [26-11]

    Egress-Policy-Name

    [26-24]

    Pppoe-Description

    [26-26]

    QoS-Profile-Name

    [26-35]

    Acct-Input-Gigapackets

    [26-43]

    Acct-Output-Gigapackets

    [26-44]

    Tunnel-Interface-ID

    [26-45]

    Ipv6-Virtual-Router

    [26-46]

    Ipv6-Local-Interface

    [26-47]

    Ipv6-Primary-DNS

    [26-48]

    Ipv6-Secondary-DNS

    [26-51]

    Disconnect-Cause

    [26-53]

    Service-Description

    [26-55]

    DHCP-Options

    [26-56]

    DHCP-MAC-Address

    [26-57]

    DHCP-GI-Address

    [26-62]

    MLPPP-Bundle-Name

    [26-63]

    Interface-Description

    [26-81]

    L2c-Information

    [26-92]

    L2C-Up-Stream-Data

    [26-93]

    L2C-Down-Stream-Data

    [26-106]

    Ipv6-Ingress-Policy-Name

    [26-107]

    Ipv6-Egress-Policy-Name

    [26-110]

    Acc-Loop-Cir-Id

    [26-111]

    Acc-Aggr-Cir-Id-Bin

    [26-112]

    Acc-Aggr-Cir-Id-Asc

    [26-113]

    Act-Data-Rate-Up

    [26-114]

    Act-Data-Rate-Dn

    [26-115]

    Min-Data-Rate-Up

    [26-116]

    Min-Data-Rate-Dn

    [26-117]

    Att-Data-Rate-Up

    [26-118]

    Att-Data-Rate-Dn

    [26-119]

    Max-Data-Rate-Up

    [26-120]

    Max-Data-Rate-Dn

    [26-121]

    Min-LP-Data-Rate-Up

    [26-122]

    Min-LP-Data-Rate-Dn

    [26-123]

    Max-Interlv-Delay-Up

    [26-124]

    Act-Interlv-Delay-Up

    [26-125]

    Max-Interlv-Delay-Dn

    [26-126]

    Act-Interlv-Delay-Dn

    [26-127]

    DSL-Line-State

    [26-128]

    DSL-Type

    [26-129]

    Ipv6-NdRa-Prefix

    [26-141]

    Downstream-Calculated-Qos

    [26-142]

    Upstream-Calculated-Qos-Rate

    [26-150]

    ICR-Partition-Id

    [26-159]

    DHCP-Option 82

    [26-165]

    PCP-Server-Name

    [30]

    Called-Station-Id

    [31]

    Calling-Station-Id

    [32]

    NAS-Identifier

    [41]

    Acct-Delay-Time

    [44]

    Acct-Session-Id

    [45]

    Acct-Authentic

    [49]

    Acct-Terminate-Cause

    [50]

    Acct-Multi-Session-Id

    [51]

    Acct-Link-Count

    [52]

    Acct-Input-Gigawords

    [53]

    Acct-Output-Gigawords

    [55]

    Event-Timestamp

    [61]

    NAS-Port-Type

    [64]

    Tunnel-Type

    [65]

    Tunnel-Medium-Type

    [66]

    Tunnel-Client-Endpoint

    [67]

    Tunnel-Server-Endpoint

    [68]

    Acct-Tunnel-Connection

    [77]

    Connect-Info

    [82]

    Tunnel-Assignment-Id

    [83]

    Tunnel-Preference

    [87]

    NAS-Port-Id

    [90]

    Tunnel-Client-Auth-Id

    [91]

    Tunnel-Server-Auth-Id

    [96]

    Framed-Interface-Id

    [97]

    Framed-Ipv6-Prefix

    [99]

    Framed-Ipv6-Route

    [100]

    Framed-IPv6-Pool

    [123]

    Delegated-IPv6-Prefix

    [144]

    DS-Lite-Tunnel-Name

    [188]

    Ascend-Num-In-Multilink

     

    All Tunnel-Server-Attributes

     

    All Ipv6-Accounting Attributes

    Published: 2014-08-20