Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    CLI Commands Used to Configure RADIUS IETF Attributes

    Table 1 lists the RADIUS IETF attributes and the corresponding CLI commands used to configure them. The attributes are listed numerically—each attribute is followed by a list of the commands that you can use to manage the attribute.

    Table 1: CLI Commands Used to Configure RADIUS IETF Attributes

    Attribute Number

    Attribute Name

    CLI Command

    [4]

    NAS-IP-Address

    [5]

    NAS-Port

    [8]

    Framed-IP-Address

    [9]

    Framed-Ip-Netmask

    [13]

    Framed-Compression

    [22]

    Framed-Route

    [25]

    Class

    [30]

    Called-Station-Id

    [31]

    Calling-Station-Id

    [32]

    NAS-Identifier

    [41]

    Acct-Delay-Time

    [44]

    Acct-Session-Id

    [45]

    Acct-Authentic

    [49]

    Acct-Terminate-Cause

    [50]

    Acct-Multi-Session-Id

    [51]

    Acct-Link-Count

    [52]

    Acct-Input-Gigawords

    [53]

    Output-Gigawords

    [55]

    Event-Timestamp

    [61]

    NAS-Port-Type

    [64]

    Tunnel-Type

    [65]

    Tunnel-Medium-Type

    [66]

    Tunnel-Client-Endpoint

    [67]

    Tunnel-Server-Endpoint

    [68]

    Acct-Tunnel-Connection

    [77]

    Connect-Info

    [82]

    Tunnel-Assignment-Id

    [83]

    Tunnel-Preference

    [87]

    NAS-Port-Id

    [90]

    Tunnel-Client-Auth-Id

    [91]

    Tunnel-Server-Auth-Id

    [96]

    Framed-Interface-Id

    [97]

    Framed-Ipv6-Prefix

    [99]

    Framed-Ipv6-Route

    [100]

    Framed-Ipv6-Pool

    [123]

    Delegated-Ipv6-Prefix

    [144]

    DS-Lite-Tunnel-Name

    [188]

    Ascend-Num-In-Multilink

    All Tunnel Server Attributes

    Published: 2014-08-20