Related Documentation
- Subscriber AAA Access Messages Overview
- Subscriber AAA Accounting Messages Overview
- CLI Commands Used to Configure RADIUS IETF Attributes
- CLI Commands Used to Configure Juniper Networks VSAs
- CLI Commands Used to Include or Exclude Attributes in RADIUS Messages
- CLI Commands Used to Ignore Attributes when Receiving Access-Accept Messages
- DSL Forum VSAs
- Juniper Networks VSAs
RADIUS Attributes Supported for CLI AAA Messages
There are four types of AAA messages used by CLI users to gain administrative access to the router. Access-Challenge attributes pertain only to CLI/telnet users.
- Access-Request
- Access-Accept
- Access-Challenge
- Access-Reject
Table 1 lists the RADIUS attributes supported for CLI AAA messages.
Table 1: CLI AAA Access Message RADIUS Attributes Supported
Attribute Number | Attribute Name | Access-Request | Access-Accept | Access-Challenge | Access-Reject |
|---|---|---|---|---|---|
[1] | User-Name | ✓ | – | – | – |
[2] | User Password | ✓ | – | – | – |
[4] | NAS-IP-Address | ✓ | – | – | – |
[6] | Service-Type | ✓ | ✓ | – | – |
[18] | Reply-Message | – | – | ✓ | ✓ |
[24] | State | ✓ | – | ✓ | – |
[25] | Class | – | ✓ | – | – |
[26-1] | Virtual-Router | – | ✓ | – | – |
[26-18] | Init-CLI-Access-Level | – | ✓ | – | – |
[26-19] | Allow-All-VR-Access | – | ✓ | – | – |
[26-20] | Alt-CLI-Access-Level | – | ✓ | – | – |
[26-21] | Alt-CLI-Virtual-Router-Name | – | ✓ | – | – |
[26-25] | Redirect-Vrouter-Name | – | ✓ | – | – |
Related Documentation
- Subscriber AAA Access Messages Overview
- Subscriber AAA Accounting Messages Overview
- CLI Commands Used to Configure RADIUS IETF Attributes
- CLI Commands Used to Configure Juniper Networks VSAs
- CLI Commands Used to Include or Exclude Attributes in RADIUS Messages
- CLI Commands Used to Ignore Attributes when Receiving Access-Accept Messages
- DSL Forum VSAs
- Juniper Networks VSAs
