Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    QoS Terms

    Table 1 defines terms used in this discussion of QoS.

    Table 1: QoS Terminology

    Term

    Description

    Assured rate

    Bandwidth guaranteed until the node below in the scheduler hierarchy is oversubscribed.

    Best effort

    Network forwards as many packets as possible in as reasonable a time as possible. This is the default per-hop behavior (PHB) for packet transmission.

    Best-effort queue

    For a logical interface, the queue associated with the best-effort traffic class for that logical interface,

    Best-effort scheduler node

    The scheduler node associated with a logical interface and traffic class group pair, and where the traffic class group contains the best-effort traffic class. Also known as best-effort node.

    CDV

    Cell delay variation. Measures the difference between a cell’s expected and actual transfer delay. Determines the amount of jitter.

    CDVT

    Cell delay variation tolerance. Specifies the acceptable tolerance of CDV (jitter).

    Effective weight

    The result of a weight or an assured rate. Users configure the scheduler node by specifying either an assured rate or a weight within a scheduler profile. An assured rate, in bits per second, is translated into a weight. The resultant weight is referred to as an effective weight.

    Group node

    A scheduler node associated with a {port interface, traffic-class group} pair. Because the logical interface is the port, only one such scheduler node can exist for each traffic-class group above the port. This node aggregates all traffic for traffic classes in the group.

    HAR

    Hierarchical assured rate. Dynamically adjusts bandwidth for scheduler nodes.

    HRR

    Hierarchical round-robin. Allocates bandwidth to queues in proportion to their weights.

    Latency

    Delay in the transmission of a packet through a network from beginning to end.

    Proprietary QoS Management Information Base (MIB)

    Supported on the E Series router.

    Queue

    First-in-first-out (FIFO) set of buffers that control packets on the data path.

    QoS port-type profile

    Supplies the QoS information for forwarding interfaces stacked above ports of the associated interface type.

    QoS profile attachment

    Applies the rules in the QoS profile to a specific interface.

    Rate shaping

    Allows you to throttle a queue to a specified rate.

    RED

    Random early detection congestion avoidance technique.

    Scheduler hierarchy

    A hierarchical, tree-like arrangement of scheduler nodes and queues. The router supports up to three levels of scheduler nodes stacked above a port. The port scheduler is at level 0, with two levels of scheduler nodes at levels 1 and 2. A final level of queues is stacked above the nodes.

    Scheduler node

    An element within the hierarchical scheduler that implements bandwidth controls for a group of queues. Queues are stacked above scheduler nodes in a hierarchy. The root node is associated with a channel or physical port.

    Shaping rate

    Bandwidth in a queue or node can be throttled to a specified rate.

    Shared shaper constituent

    All nodes and queues that are associated with a logical interface that is being shared shaped are considered potential constituents of the shared shaper.

    Weight

    Specifies the relative weight for queues in the traffic class.

    WRED

    Weighted random early detection congestion avoidance technique.

    Published: 2014-08-11