Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    QoS Platform Considerations

    QoS is supported on all E Series line modules except for the ES2 10G Uplink LM.

    Figure 1 shows the traffic flow through the router.

    Figure 1: Traffic Flow Through an E Series Router

    Traffic Flow Through an E Series
Router

    For information about the modules supported on E Series routers:

    • See the ERX Module Guide for modules supported on ERX7xx models, ERX14xx models, and the Juniper Networks ERX310 Broadband Services Router.
    • See the E120 and E320 Module Guide for modules supported on the Juniper Networks E120 and E320 Broadband Services Routers.

    Interface Specifiers

    The majority of the configuration task examples in this topic collection use the slot/port format to specify an interface. However, the interface specifier format that you use depends on the router that you are using.

    For ERX7xx models, ERX14xx models, and ERX310 routers, use the slot/port format. For example, the following command specifies an ATM interface on slot 0, port 1 of an ERX7xx model, ERX14xx model, or ERX310 router.

    host1(config)#interface gigabitEthernet 0/1

    For E120 and E320 routers, use the slot/adapter/port format, which includes an identifier for the bay in which the I/O adapter (IOA) resides. In the software, adapter 0 identifies the right IOA bay (E120 router) and the upper IOA bay (E320 router); adapter 1 identifies the left IOA bay (E120 router) and the lower IOA bay (E320 router). For example, the following command specifies a10-Gigabit Ethernet interface on slot 5, adapter 0, port 0 of an E320 router.

    host1(config)#interface tenGigabitEthernet 5/0/0
     

    Related Documentation

     

    Published: 2014-08-11