Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Commands Used to Monitor IPv6

    You can monitor the following aspects of IPv6 using show ipv6 commands:

    To Display


    General IPv6 information

    show ipv6

    IPv6 addresses

    show ipv6 address

    IPv6 forwarding table

    show ipv6 forwarding-table slot

    IPv6 Interfaces

    show ipv6 interface

    IPv6 neighbors

    show ipv6 neighbors

    IPv6 profile information

    show ipv6 profile

    Active IPv6 protocol information

    show ipv6 protocols

    IPv6 route redistribution configuration

    show ipv6 redistribute

    IPv6 routes

    show ipv6 route

    IPv6 router advertisements received

    show ipv6 routers

    IPv6 static routes

    show ipv6 static

    IPv6 statistics/traffic

    show ipv6 traffic

    IPv6 UDP information

    show ipv6 udp statistics

    IPv6 license string

    show license

    IPv6 TCP information

    show tcp statistics

    IPv6 local address pools

    show ipv6 local pool

    You can use the output filtering feature of the show command to include or exclude lines of output based on a text string that you specify. See JunosE System Basics Configuration Guide, for details.

    Published: 2014-08-13