Commands Used to Monitor IP
You can monitor the following aspects of IP using show ip commands:
To Display | Command |
|---|---|
RTR information | |
Access lists | |
ARP | |
General IP information | |
IP addresses | |
Community lists | |
Routing table | |
Interfaces | |
Shared IP interfaces | |
Protocols | |
Redistribution policies | |
Routes | |
Interfaces and next hops | |
Socket statistics | |
Static routes | |
TCP ACK, RST, and SYN protection status | |
Black hole threshold information | |
TCP PAWS protection status | |
TCP resequence buffer information | |
TCP statistics | |
Traffic | |
UDP statistics | |
Profiles | |
Route maps |
To set a statistics baseline for IP interfaces, use the baseline tcp and baseline ip udp commands. Use the delta keyword with IP show commands to specify that baselined statistics are to be shown.
You can use the output filtering feature of the show command to include or exclude lines of output based on a text string that you specify. See JunosE System Basics Configuration Guide, for details.
