Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    Ethernet OAM Link-Fault Management Platform Considerations

    You can configure 802.3ah link-fault management on the following E Series routers:

    • E120 router
    • E320 router
    • ERX1440 router
    • ERX1410 router
    • ERX710 router
    • ERX705 router
    • ERX310 router

    Module Requirements

    For information about the modules that support 802.3ah link-fault management on ERX14xx models, ERX7xx models, and the ERX310 router:

    • See ERX Module Guide, Table 1, Module Combinations for detailed module specifications.
    • See ERX Module Guide, Appendix A, Module Protocol Support for information about the modules that support 802.3ah link-fault management.

    For information about the modules that support 802.3ah link-fault management on the E120 and E320 routers:

    • See E120 and E320 Module Guide, Table 1, Modules and IOAs for detailed module specifications.
    • See E120 and E320 Module Guide, Appendix A, IOA Protocol Support for information about the modules that support 802.3ah link-fault management.

    Interface Specifiers

    The configuration task examples in this chapter use the format for ERX7xx models, ERX14xx models, and the ERX310 router to specify 802.3ah link-fault management

    For example, the following command specifies a Gigabit Ethernet interface on port 0 of an I/O module in slot 4.

    host1(config)#interface gigabitEthernet 4/0

    When you configure a Gigabit Ethernet interface or a 10-Gigabit Ethernet interface on E120 or E320 routers, you must include the adapter identifier as part of the interface specifier. For example, the following command specifies a Gigabit Ethernet interface on port 0 of the IOA installed in the upper adapter bay of slot 3.

    host1(config)#interface gigabitEthernet 3/0/0

    For more information about interface types and specifiers on E Series models, see Interface Types and Specifiers in JunosE Command Reference Guide.

     

    Related Documentation

     

    Published: 2014-08-14