Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    vlan bulk-config shutdown

    Syntax

    To shut down or reenable the specified bulk configuration or a specific VLAN range:

    [ no ] vlan bulk-config bulkConfigName shutdown

    [ no ] vlan bulk-config bulkConfigName shutdown vlan-range vlanIdStart vlanIdEnd

    To shut down or reenable VLAN ranges containing double-tagged S-VLAN IDs or based on agent-circuit-identifier information:

    [ no ] vlan bulk-config bulkConfigName shutdown svlan-range s-vlanIdStart s-vlanIdEnd
    { vlanIdStart vlanIdEnd | any | agent-circuit-identifier }

    Release Information

    Command introduced in JunosE Release 7.3.0.

    Description

    Administratively disables (shuts down) the specified bulk configuration, or a specified VLAN range or subrange. When you shut down a specified bulk configuration, all VLAN ranges, including those based on double-tagged S-VLAN IDs or agent-circuit-identifier information, are disabled. The no version reenables the specified bulk configuration, the specified VLAN range, or the specified subranges; this is the default condition.

    Options

    • bulkConfigName—Name of the VLAN range; string of up to 80 characters
    • vlanIdStart—Starting VLAN ID of the VLAN subrange you are configuring
    • vlanIdEnd—Ending VLAN ID of the VLAN subrange you are configuring
    • s-vlanIdStart—Starting S-VLAN ID of the S-VLAN subrange you are configuring
    • s-vlanIdEnd—Ending S-VLAN ID of the S-VLAN subrange you are configuring
    • any—Specifies the VLAN ID as a wildcard
    • agent-circuit-identifier—Specifies a VLAN range that is based on agent-circuit-identifier information

    Mode

    Interface Configuration

    Published: 2014-08-18