Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    vbr-rt

    Syntax

    vbr-rt pcr scr mbs

    no vbr-rt

    Release Information

    Command introduced in JunosE Release 7.1.0.
    ATM VC Class Configuration mode added in JunosE Release 7.3.0.

    Description

    In ATM VC Configuration mode, configures the variable bit rate, real time (VBR-RT) service category on an ATM PVC. You must specify the peak cell rate (PCR), sustained cell rate (SCR), and maximum burst size (MBS). The vbr-rt command is valid only for data PVCs; you cannot use this command for control (ILMI or signaling) PVCs. The no version restores the default service category, unspecified bit rate (UBR) without a PCR.

    In ATM VC Class Configuration mode, configures the VBR-RT service category as part of a VC class definition that you assign to an ATM PVC. The no version restores the default service category, UBR without a PCR, in the VC class.

    Options

    • pcr—Peak cell rate, in Kbps, in the range 0–149760 (for OC3 ATM modules) or 0–599040 (for OC12 ATM modules)
    • scr—Sustained cell rate, in Kbps, in the range 0–149760 (for OC3 ATM modules) or 0–599040 (for OC12 ATM modules)
    • mbs—Maximum burst size, in cells, in the range 0–16777215

    Mode

    ATM VC Configuration, ATM VC Class Configuration

    Published: 2014-08-18