Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    unknown-protocol

    Syntax

    unknown-protocol { permit | deny }

    no unknown-protocol

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Modifies the subscriber policy for packets containing an unknown protocol to define whether the subscriber (client) interfaces that belong to a bridge group or to a VPLS instance forward (permit) or filter (deny) these packets. The no version restores the default value, permit unknown protocol packets.

    You cannot change the default subscriber policy values for trunk (server) interfaces that belong to a bridge group or to a VPLS instance. You also cannot change the default subscriber policy values for a VPLS virtual core interface, which acts as a trunk interface. The VPLS virtual core interface represents all of the MPLS tunnels from the router to the remote VPLS edge (VE) devices.

    Options

    • permit—Specifies that the subscriber interface associated with the bridge group or VPLS instance forwards packets containing an unknown protocol
    • deny—Specifies that the subscriber interface associated with the bridge group or VPLS instance filters packets containing an unknown protocol

    Mode

    Subscriber Policy Configuration

    Published: 2014-08-18