Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    timers spf


    [ no ] timers spf holdTime

    Release Information

    Command introduced before JunosE Release 7.1.0.


    Configures the delay time between when OSPF receives a topology change and when it starts an SPF calculation and the hold time between two consecutive SPF calculations. The no version restores the default value.


    • holdTime—Number in the range 1–5 seconds; default value is 3; the hold time between consecutive SPF calculations


    Router Configuration

    Published: 2014-08-18