Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    timeout

    Syntax

    RADIUS:

    timeout waitTime

    no timeout

    RTR:

    timeout timeoutValue

    no timeout

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    When used from RADIUS Configuration mode, specifies the interval, in seconds, before the router retransmits a RADIUS packet to an authentication or accounting server. The no version restores the default.

    When used from RTR Configuration mode, specifies the timeout for a Response Time Reporter operation. The no version returns the operation to the default value. You can apply this parameter only to echo entries.

    Options

    • waitTime—Number of seconds in the range 1–1000; default value is 3
    • timeoutValue—Number in milliseconds that the operation waits for a response; if the value is set to 0 or is larger than frequency, it will be ignored; default value is 5000

    Mode

    RADIUS Configuration, RTR Configuration

    Published: 2014-08-20