Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    tacacs-server timeout

    Syntax

    tacacs-server timeout timeoutValue

    no tacacs-server timeout

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Sets the interval in seconds that the server waits for the TACACS+ server host to reply. This value is shared by those TACACS+ servers that do not have a timeout interval set by the tacacs-server host command. The no version resets the timeout interval shared by all TACACS+ servers.

    Note: You can configure the TACACs+ server only on default virtual routers. If you attempt to configure TACACS+ server settings on VRs other than the default VR or in a VRF, an error message is displayed.

    Options

    • timeoutValue—Response timeout interval for the TACACS+ client to server exchange; number in the range 1–255; default value is 5

    Mode

    Global Configuration

    Published: 2014-08-20