Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    tacacs-server host

    Syntax

    tacacs-server host ipAddress [ port portNumber ]
    [ timeout timeoutValue ] [ key keyValueString ] [ primary ]

    no tacacs-server host ipAddress

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Adds or deletes a host to or from the list of TACACS+ servers. If the host is not assigned as the primary host, the router assigns an existing host as the primary. The no version deletes the host from the list of TACACS+ servers.

    Note: You can configure the TACACs+ server only on default virtual routers. If you attempt to configure TACACS+ server settings on VRs other than the default VR or in a VRF, an error message is displayed.

    Options

    • ipAddress—IP address of the TACACS+ server
    • portNumber—TACACS+ server’s TCP port number in the range 1–655535
    • timeoutValue—Response timeout interval for the TACACS+ client to server exchange; number in the range 1–255; default value is 5
    • keyValueString—Secret used in TACACS+ client to server exchange; string of up to 100 characters
    • primary—Assigns the host as the primary host

    Mode

    Global Configuration

    Published: 2014-08-20