Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All



    table-map mapTag

    For removing route maps for IS-IS IPv6 only:

    no table-map

    For removing route maps for all other cases:

    no table-map [ mapTag ]

    Release Information

    Command introduced before JunosE Release 7.1.0.


    Applies the specified route map to all BGP, IS-IS, OSPF, or RIP routes about to be added to the IP routing table. The no version halts application of the route map.


    • mapTag—A string of up to 32 alphanumeric characters that specifies the name of the route map; for each protocol, the route map can set only the following values:
      • BGP—Distance, IP next hop, level, metric, metric type, route type, and tag values
      • IS-IS—Distance, level, metric, metric type, origin, preference, route type, and tag values; IS-IS IPv6 supports only a single route map
      • OSPF—Distance, metric, metric type, route type, and tag values
      • RIP—Distance, metric, and tag values


    Address Family Configuration (BGP, IS-IS, RIP), Router Configuration (BGP, IS-IS, OSPF, RIP)

    Published: 2014-08-18