Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     
     

    t1 fdl

    Syntax

    t1 channel fdl { ansi | att | all | none }

    no t1 channel fdl [ ansi | att | all ]

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Specifies the FDL standard used by a specific T1 channel on the CT3 interface. The no version restores the default, none.

    Options

    • channel—One or more individual T1 channels, ranges of T1 channels, or combination of individual channels and ranges, in the range 1–28 (no spaces); for example, 3,7-15,19-13,27
    • ansi—Specifies ANSI T1.403 Standard for extended superframe FDL exchange support
    • att—Specifies AT&T Technical Reference 54016 for extended superframe FDL exchange support
    • all—Specifies both the AT&T and ANSI mode for extended superframe FDL exchange support
    • none—Removes the current FDL mode settings

    Mode

    Controller Configuration

     
     

    Published: 2014-08-18