Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     
     

    t1 fdl transmit

    Syntax

    t1 channel fdl transmit { path-id | idle-signal | test-signal }

    no t1 channel fdl transmit [ path-id | idle-signal | test-signal ]

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Configures the router to send the specified FDL message on a T1 channel on a CT3 interface. The no version stops the router from sending the specified FDL message or all FDL messages.

    Options

    • channel—One or more individual T1 channels, ranges of T1 channels, or combination of individual channels and ranges, in the range 1–28 (no spaces); for example, 3,7-15,19-13,27
    • path-id—Transmits a path identification message every second; default value is disabled
    • idle-signal—Transmits an idle signal message every second; default value is disabled
    • test-signal—Transmits a test signal message every second; default value is disabled

    Mode

    Controller Configuration

     
     

    Published: 2014-08-18