Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    svlan ethertype

    Syntax

    svlan ethertype ethertypeValue

    no svlan ethertype

    Release Information

    Command introduced before JunosE Release 7.1.0.
    88a8 keyword added in JunosE Release 7.1.0.

    Description

    In Interface Configuration mode, specifies the Ethertype of an S-VLAN. The no version restores the default value, 9100.

    In Profile Configuration mode, specifies the available Ethertypes that the packet must use to create a dynamic VLAN subinterface. The no version restores the default value, autoconfig.

    Use an Ethertype value that matches the Ethertype value set on the customer premises equipment (CPE) to which your router connects.

    Options

    • ethertypeValue—One of the following Ethertype values:
      • 8100—Specifies Ethertype value 0x8100, as defined in IEEE Standard 802.1q
      • 88a8—Specifies Ethertype value 0x88a8, as defined in draft IEEE Standard 802.1ad
      • 9100—Specifies Ethertype value 0x9100, which is the default for Interface Configuration mode
      • autoconfig—Specifies in a VLAN profile that the packet can use any Ethertype to create a dynamic VLAN subinterface; this is the default for Profile Configuration mode

    Mode

    Interface Configuration, Profile Configuration

    Published: 2014-08-18