Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    single-shot-tunnel

    Syntax

    [ no ] single-shot-tunnel

    Release Information

    Command introduced in JunosE Release 7.2.0.

    Description

    Configures the L2TP/IPsec tunnels associated with a particular L2TP host profile as single-shot tunnels. The underlying IPsec connection for a single-shot tunnel can carry no more than a single L2TP tunnel for the duration of its existence, and the L2TP tunnel can carry no more than a single L2TP session for the duration of its existence. The no version restores the default behavior for L2TP/IPsec tunnels, which disables the single-shot attribute.

    Note: Although configuration of single-shot tunnels is more typically used with secure L2TP/IPsec tunnels, you can also configure single-shot tunnels for nonsecure L2TP tunnels that do not run over an IPsec transport connection.

    Mode

    L2TP Destination Profile Host Configuration

    Published: 2014-08-18