Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    show mpls tunnels

    Syntax

    show mpls [ traffic-eng ] tunnels [ name tunnelName ]
    [ role { all | head | tail | middle | remote } | up | down ]
    [ source-id sourceAddress [ srcId ] ] [ destination destAddr ]
    [ interface interfaceType interfaceSpecifier ] [ brief | count-only ] [ filter ]

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Displays status and configuration for all tunnels or for a specific tunnel in the current router context.

    Options

    • traffic-eng—Specifies optional keyword for compatibility with non–E Series implementations
    • tunnelName—Name of tunnel or minor interface to be displayed
    • role—Displays tunnels in which the router has a specified role:
      • all—Displays all tunnels of which the router is a part
      • head—Displays tunnels where the router is the ingress router, or tunnel headend
      • tail—Displays tunnels where router is the egress router, or tunnel tailend (endpoint or destination of the tunnel)
      • middle—Displays tunnels where router is a transit router on the tunnel
      • remote—Displays tunnels where router is a transit router or egress router (tailend)
    • up—Displays tunnels that are up
    • down—Displays tunnels that are down
    • sourceAddress—Source address of tunnels to be displayed
    • srcId—Local ID associated with source address of tunnels to be displayed, an integer in the range 0–65535
    • destAddress—Destination address of tunnels to be displayed
    • interface—Displays information for the specified interface
    • brief—Displays only brief or summary information about the tunnels
    • count-only—Displays a count for entries that match the specified conditions
    • filter—See Filtering show Commands

    Mode

    Privileged Exec, User Exec

    Published: 2014-08-18