Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    show mpls fast-reroute database

    Syntax

    show mpls [ traffic-eng ] fast-reroute database [ ipAddress ]
    [ name tunnelName ] [ interface interfaceType interfaceSpecifier ]
    [ status { all | desired | establishing | established | active | unknown } ]
    [ count-only ] [ filter ]

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Displays information about the backup state of protected primary tunnels.

    Options

    • traffic-eng—Specifies optional keyword for compatibility with non–E Series implementations
    • ipAddress—Address of the endpoint for the primary LSP; meaningful only for the tunnel ingress node
    • tunnelName—Name of the primary LSP; meaningful only for the tunnel ingress node
    • interfaceType—Interface type; see Interface Types and Specifiers
    • interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
    • status—Displays only entries with the specified status:
      • all—Displays all entries regardless of backup protection status
      • desired—Displays entries where backup protection is desired
      • establishing—Displays entries where backup protection is being established
      • established—Displays entries where backup protection is established
      • active—Displays entries where backup protection is active
      • unknown—Displays entries where status of backup protection is unknown
    • count-only—Displays count of entries matching command specification
    • filter—See Filtering show Commands

    Mode

    Privileged Exec, User Exec

    Published: 2014-08-18