Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    show mpls binding

    Syntax

    For MPLS binding information:

    show mpls { [ ip ] binding | binding ip }
    [ destAddr [ maskLength | maskAddress ] [ longer-prefixes ] ]
    [ interface interfaceType interfaceSpecifier ]
    [ neighbor ipAddress ] [ generic | atm ] [ local | remote ]
    [ label { atm vpi vci | explicit-null-label | implicit-null-label |
    labelNumber [ labelRangeEnd ] } ]
    [ brief ] [ filter ]

    For layer 2 over MPLS binding information:

    show mpls binding layer2-vc [ vc-type vcType [ vc-id vcId ] ]
    [ interface interfaceType interfaceSpecifier ]
    [ neighbor ipAddress ] [ generic | atm ] [ local | remote ]
    [ label { atm vpi vci | explicit-null-label | implicit-null-label |
    labelNumber [ labelRangeEnd ] } ]
    [ brief ] [ filter ]

    Release Information

    Command introduced before JunosE Release 7.1.0.
    explicit-null-label keyword added in JunosE Release 7.2.0.

    Description

    Displays label bindings from the MPLS label information base. This command displays the same output as the show ldp binding command.

    Options

    • ip—Specifies optional keyword for compatibility with non–E Series implementations when placed before the binding keyword; when present (either before or after this keyword) displays label binding information only for IP prefixes
    • destAddr—Destination address for which you want information displayed; if not specified, displays all destinations
    • maskLength—Prefix length for the destination address
    • maskAddress—Address mask to be applied to the destination address
    • longer-prefixes—Displays information for prefixes that are equal to or more specific than the specified prefix
    • interface—Displays labels associated with the specified interface
    • ipAddress—Displays labels associated with the specified neighbor
    • generic—Displays only generic labels
    • atm—Displays only ATM VPI/VCI labels
    • local—Displays only local labels
    • remote—Displays only remote labels
    • atm—Displays the specified ATM VPI/VCI labels
      • vpi—Specifies ATM VPI that partially designates a label
      • vci —Specifies ATM VCI that partially designates a label
    • explicit-null-label—Displays binding information for the explicit null label
    • implicit-null-label—Displays binding information for the implicit null label
    • labelNumber—Label for which binding information is displayed; number in the range 16–1048575
    • labelRangeEnd—Label designating the high end of a range of labels for which binding information is specified; number in the range 16–1048575
    • brief—Displays limited information
    • filter—See Filtering show Commands
    • layer2-vc—Displays binding information for layer 2 over MPLS
    • vcType—One of the following types of virtual circuit over MPLS for which binding information is displayed: aal5-vcc, ethernet, frame-relay, vlan
    • vcId—Virtual circuit identifier, number in the range 1–4294967295

    Mode

    Privileged Exec, User Exec

    Published: 2014-08-18